Corrosion Inhibitor Intermediate

1.imidazoline is the corrosion ingredient 2.corrosion rate is higher than 90%

Corrosion Inhibitor Intermediate;Intermediate

1, Introduction

Normally, imidazoline is the corrosion ingredient of corrosion inhibitor, while we use bis-imidazoline as corrosion ingredients. There are two pairs of imidazoline molecule pentacyclic group and two adsorption groups in bis-inidazoline, so its adsorption is higher the imidazoline.

2, Technique sheet

Items	Index
Appearance	Yellow to red-brown liquid
PH value	9.0-11.0
Active ingredient(%)	≥55
Solubility	Miscible with water
Density(g/cm3)	1.00-1.15

3, Method and Use

a. Mix it with water according to 3:7 ratios,you can get corrosion inhibitor products.

b. Suitable for antisepsis of waste water reinjection equipment in oil recovery plant and atmospheric pressure, catalytic equipment in refinery.

c. Reference dosage 30-50ppm. Its inhibition rate is higher than 85%, corrosion rate is lower than 0.05mm / a. Add 30ppm in refinery, the iron ions can be reduced to below 2ppm.

4, Packing and storage

a. Net weight 200KG / plastic drum.

b. Valid for one year.

Corrosion Inhibitor Intermediate